|
 ScreenSafe was designed
with a simple, user friendly installation and
configuration wizard that will allow an Owner/Operator
to configure and activate ScreenSafe is less than 5
minutes. ScreenSafe also has the capability for a Fleet
Manager to access our online ScreenSafe Configuration
Portal and configure a “Master” configuration template
that will be automatically downloaded and applied to all
vehicles in the fleet.
 Once a “Master Configuration” is created, the individual
vehicle drivers will not have the opportunity to alter
or make changes to the “Master
Configuration” created by the Fleet Manger. This Master
Configuration will be automatically downloaded and
installed in each ScreenSafe enabled laptop. The Fleet
Manager can even view an online report and verify the
date and time the configuration was applied on the
remote laptop computer.
Screen Safe's Global Manager will allow the Fleet Manager to create
custom groups of vehicles with unique
configuration settings. If needed, the Fleet Manger can
even specify configurations that only apply to specific
cars. For example, a city fleet manager could maintain
one configuration file that applies to public works
vehicles, another for city manager’s vehicles, and yet
another for all emergency vehicles. The Fleet
Manager could even create a "special Configuration
Group" for drivers on probations who have problems with
speeding while at work. ScreenSafe is the most
powerful, most customizable
Distracted Driving
Protection Application available.
Click Here to view the Online Web Configuration Screens
Some of the more popular Configuration Settings a Fleet
Manager can select include:
|
Enable / Disable
Speed |
| |
Some Fleet Managers may want the laptop to
immediately disable the screen as soon as the
vehicle begins moving, other Fleet Managers
(example: city power line inspectors) may want
the computer operational at speeds of less than
10 mph but for the screen to be disabled at any speed
above 10 mph. Because of it’s flexibility
and customization, ScreenSafe could be used on
laptops of Police and Emergency vehicles.
ScreenSafe would not affect computer function at
normal speeds, but would remove screen
distractions while in “Hot Pursuit” situations
where vehicle speeds may exceed 90 mph. |
|
Quick Peak |
| |
This option can be enabled or disabled. The
Quick Peek function allows the driver to hit the
“space bar” and allow temporary viewing of the
monitor for a limited number of seconds as
defined in the configuration settings. This allows the
driver to have a “Quick Peek” at a mapping
application or destination address. |
|
GPS Unplugged |
| |
One concern many Fleet Managers have is that a
driver might try to defeat the application by
unplugging the
GPS. If this happens ScreenSafe will log an
Alert and notify the Fleet Manager. The Fleet
Manager can also configure the action ScreenSafe takes should a Driver Unplug
the GPS. You can either re-enable the laptop for
simply LOCK the laptop from use until the GPS is
reattached. The ScreenSafe application will also
play a warning message (“GPS Removed”) if the
driver unplugs the
GPS. If desired, the Fleet Manage has
the ability to TOTALLY DISABLE any laptop the
moment a driver attempts to disconnect the GPS
antenna; the laptop will become operational
again once the GPS antenna is reattached. |
|
Police Notification Page |
| |
 If
a vehicle is stopped by an officer of the Law
Enforcement he can simply show the officer the
"Police Page" which verifies that the computer
was disabled while the vehicle has been in
motion. ScreenSafe constantly records the
status of the screen and is able to provide this
information in an easy to read format that
clearly explains how ScreenSafe was able to lock
the monitor. |
|
Speed Limit
Exceeded (Available with
Global
Manager: Web Reports & Alerts) |
| |
Alerts can be set to notify Fleet Manager when
vehicle speeds exceed limits set in the
configuration file. Simply set the Max Speed
Limit for a speed (say 70 MPH) and Screen Safe
will alert both the Driver (verbal warning) and
the Fleet Manager (email alert) if the vehicle
is traveling at a speed over the limit set. |
|
Worm Hole
Alerting (Available with
Global
Manager: Web Reports & Alerts) |
| |
A Fleet Manager
needs to overview compliance with the Use of the
ScreenSafe application. The Fleet Manager
can view not only active vehicles but inactive
vehicles. In the case a vehicle travels xx
miles without connecting the GPS antenna, the
ScreenSafe application will trigger a "Worm Hole
Alert. A Worm Hole is a situation by which
a vehicle was last detected at one location and
without recording any vehicle movement appears
at another, distant location..... worm hole. |
|
Custom
Geo-Fencing Area (Available with
Global
Manager: Web Reports & Alerts) |
| |
A Fleet Manager
can create a "Custom Boundary Area" that all
vehicles must remain inside. You simply
locate a point on a may, say the middle of your
city and define the sixe of the circle around
your city. to overview compliance with the Use of the
ScreenSafe application. The Fleet Manager
can view not only active vehicles but inactive
vehicles. In the case a vehicle travels xx
miles without connecting the GPS antenna, the
ScreenSafe application will trigger a "Worm Hole
Alert. A Worm Hole is a situation by which
a vehicle was last detected at one location and
without recording any vehicle movement appears
at another, distant location..... worm hole. |
As you can see ScreenSafe
was designed to allow each company to customize the
application to not only conform with
State Distracted
Driving Laws, but to also meet their corporate policy for
safe driving. With ScreenSafe the Fleet Manager is able
to create a custom configuration that meets his
company’s vehicle driving guidelines.
|
Download Your Free Trial
of ScreenSafe Today.
|
|
